|
This Kit adds the following Items:
================================================================================================================
Model name: MCP355
Nominal Voltage: 12 VDC
Operating Voltage range: 8 - 13.2 VDC
Minimum Starting Voltage: 9 VDC
Nominal Power (@12 V): 14-19W
Nominal Current (@12 V): 1.16-1.58 Amp
Motor Type: Electronically commutated, brushless DC, spherical motor
Maximum Head: 15 ft (4.5 m)
Maximum Discharge: ~ 120 GPH (454 LPH)
Connection Size: 3/8" barbs
Maximum Pressure: 22 PSI (1.5 BAR)
Temperature Range: Up to 140°F (60°C)
Noise Level (Swiftech's Results): 30 ~ 32 dBA in a quiet room @ 2'
Electrical Connector: 4pin Molex
Weight: 7.3 oz (207 gr.)
RPM Sensor: 3 pin connector
As the computer industry continues to accelerates its pace towards implementing liquid cooling solutions, pumps have become a pivotal concern for the adoption of such systems in mission critical machines. Small size, low or no maintenance, similar to that afforded by fans, and extended reliability are prerequisites for the successful transition from air to liquid cooling systems.
Introducing the MCP355™ pump: despite a remarkably small footprint of 2.4" square, the MCP355 features an astounding 20ft of head to provide superior flow rates in today's most complex liquid cooled systems. The MCP355 is also a high reliability, high pressure industrial pump, featuring a 50,000 hour MTBF (5 year lifetime). Such reliability is afforded by the unique design of this pump, which contains only one moving part: the magnetically driven rotor/impeller spins on a single ceramic bearing, thus extending the life of this pump beyond existing standards.
The pump is completely plug-and-play, and connects directly to any computer power-supply through standard 4 pin power connectors. It's compact and powerful motor make it ideally suited for extreme duty cooling in environments where space is at a premium.
Features:
• Small Footprint: 2.4" x 2.4" x 1.5"
• 50,000 hours MTBF (Mean Time Between Failure) equivalent to 5 years lifetime.
• Superior 12 Volts DC convenience: plugs into the computer power supply
• The MCP355™ can be used with full confidence in any MP servers, and high-end workstations.
• Superior real world performance thanks to its high pressure characteristics (20ft of head). The MCP355™ is particularly well adapted to the proliferation of daisy-chained liquid cooling devices in a single circuit: Multiple Processors, Chipset, Graphics, and Hard Drives.
• 3/8" barb fittings.
• No maintenance when used with de-mineralized water, and anti-fungal additives (Our HydrX™ additive is recommended)
• Quick installation with adhesive neoprene pad, or permanent installation with screws and grommets.
• RPM sensor plugs to 3 pin motherboard fan connectors and reports impeller rotational speed
================================================================================================================
Acrylic reservoir top for laing DDC pumps
• 200ml capacity
• 2x 5mm LED Mounting holes
• Material: High Quality Acrylic
• Dimensions: 73x62x96mm
• Surface Finish: Smooth & Transparent
• Inlet/Outlet Thread Type: G1/4 (1/4" BSPP)
Note: Using this aftermarket top will void the warranty on your pump!
Included:
• (4x) Stainless Steel M4 Phillips Head screws
• (2x) Barbs of your choice
• (1x) XSPC Reservoir Pump Top
For a round up of DDC tops, checkout Martin's research here
Great performance by the XSPC reservoir top in these tests, coming first - in all categories!
|
Kits
Blocks
